• + 39 0775/392052 info@digitron-italia.it
  • versione inglese  versione tedesco  versione spagnolo

DigiCon Multichannel Controllers Data Recorders Touch Screen ModBus

DigiCon Controller + Recorder + HMI + SCADA in one package

The DigiCon line includes advanced controllers and recorders with great potential closed in small casings. DigiCon has been specifically designed for advanced applications in industrial automa control engineering. It does not mean, however, that the device cannot be applied in smaller systems. DigiCon can be equipped with three isolated RS-485 interfaces which make it a perfect solution for distributed systems to work as CPU. Thanks to Ethernet interface the device can be monitored via the Internet.
A wide range of input and output modules allows to customize DigiCon precisely as the customer requires it. Thanks to a colour touchscreen working with the user interface becomes a pleasure, while opera playing the role of HMI is intuitive e and comfortable.
Our devices are LINUX-based products to ensure stable operation

The biggest advantage of all devices from the DigiCon line is a big number of built-in inputs / outputs accessible in one compact device.
The most developed version Dig-99 has up to 48 measurement or digital inputs and 60 virtual channels whereas DIG-141 has 50% more inputs / outputs and virtual channels.
Thanks to a well-thought-out module design you can choose among a wide range of cards and connect them to slots in the way you wish but you do not have to use all slots. You can also decide on your own how to use virtual channels, if they are going to be used for direct measurement readings, mathematical functions timers, profile creation set points or virtual objects.

DigiCon Products

Dig-99

1Dig-99 is the first device in Digicon line. It’s equipped with a 3.5" colour LCD touchscreen which makes user-friendly, easy and comfortable configuration and data presentation readable and attractive. Although the Digicon Dig-99 is build in a quite small housing, it can integrate up to 48 inputs, and its construction allows user almost free configuration by choosing up to 27 available input/output cards.
In Dig-99 we have provided 60 logical channels, what is enough to build basic applications.

Dig-141

1Dig-141 is dig-99's bigger brother. It has all features included in Dig-99, but in addition it has a bigger display, more inputs/outputs and even more virtual channels.
Dig-141 is equipped with a 5.7" LCD touchscreen. The number of virtual channels was increased to 90, it helps to build sophisticated applications much easier.
Despite of small, compact case, unit allows direct connection (in a maximum mount) as many as 72 analogue or digital inputs and thanks to its design the user can configure the device on his own, using a wide range of different I / O cards. Casing depth is still only 100 mm.

Dig-N16

1As a result of extending the range of functional applications of the DigiCon line, the wall mounted model has been designed.
The new IP 65 enclosure allows using the device in harsh environments, where safe installation of a typical controller / data recorder in a panel mounted enclosure is impossible.
Although the number of available inputs is reduced if compared with the panel mounted model, the functionality available so far has been maintained.

Inputs Outputs and Comunication of DigiCon

Inputs:
- universal
- voltage
- current
- thermocouple
- RTD
- NTC
- digital
- counters
- totalizer
- rate

outputs:
- relay
- SSR
- current (4-20 mA) signals

communication:
- Ethernet
- RS-485
- RS-232
- USB Host


DigiCon ScadaLite

SCADALite is a functionality allowing for process management directly from the DigiCon screen.
Information important for the operator can be presented in graphical form, including animations, dynamic charts, the most important numbers and, in the case of alarm, also sounds. SCADALite enables definition of a specified number of screens to present different range of the required information.
The specified measurement parameters can be included in the graphics that reflects the monitored process/facility by means of a photo or drawing.

ScadaLite DigiCon

  • process management directly from the screen,
  • different screens for a single process,
  • graphics of the monitored process,
  • quick visualization,
  • free arrangement of indicators,
  • operator's work comfort,
  • easy adjustment to specialized requirements,
  • quick editing - new graphics and change of indicator arrangement is enough,
  • modification of indicator arrangement during the device operation.

Features Digicon ScadaLite

View linking

View linking is used to move directly to the view of a selected group of metering parameters.
Each view created in the SCADALite mode can be now linked to another screen. Just place the magnifying glass button in any location of a specific view and assign the link to the selected group. This function can be used to create multi-level dependencies between view groups, e.g. creating a structure leading from the general application image to sets of detailed parameters.

Parametric screeens

Irrespective of the advanced SCADALite data visualization possibilities, the operator may select one of the standard views, according to individual preferences.
Depending on whether we need a detailed information on the signal value, quick insight into the signal level, or parameter trend over time, the data can be presented as:

  • numerical values,
  • quasi-analog indicators,
  • phasor charts,
  • horizontal or vertical charts,
  • horizontal or vertical bars,
  • simultaneous presentation of many groups

The expanded functionality

  • MultiLevel Access
  • HTML5 and widgets
  • LookUp Table - user characteristic Tool
  • E-mail notifications
  • Video streaming
For all other information, download the PDF

Download Data Sheet Send Mail for information See HMI Terminals