prodotti applicazioni industriali servizi downloadacquisizione dati


Applications for Pharmaceutical and food-21 CFR Part 11 Compliance

TD 700-DL

In line with the peculiarities of the model TD700, this series also integrates a soft-PLC with high data storage capacity of HD solid state or flash memory or pen drive, with the ability to manage multi-channel external capture cards via RS485, Ethernet , USB or CAN interface, or to create stand-alone applications where supervision, control logic and I / O analog-digital co-exist in a single device, or even opt for combined solutions.
The soft PLC supports multi-task by running up to 10 mS and includes communication drivers Modbus RTU master / slave and Modbus TCP / IP master / slave and CANopen Master, is then able to record data in real time from equipment or sensors that have these types of protocols, providing a unique solution, a complete package of real time monitoring and data logging with high memory capacity.

Ordering codes

TD700-AD: HMi 7,0" with soft-plc + 1 serial RS232 + 1 RS485 + 1 CANopen
ETD884-AD: Expansion 2 An. 16bit/1msec (loading cells) + 8 Inp. + 8 Statics + 2 outputs Volt/mA

Main features

Box: 203x160 (front panel 5,7") x 38; 203x160 (front panel 7") x 38
Power supply: 12...24Vac/Vdc ±15% 50/60 Hz
Consumption: 3,7W
LCD TFT touch screen 7", 800x480 pixel 16 milion colors, (lifetime typ. 20,000 hours @25°C)
Operating conditions: Temperature 0-45 °C, humidity 35..95 uR%
Material: Front panel: aluminium with polycarbonate coverage; Box: chromed steel
Weight: Approx. 937 gr
Sealing: IP54 (Front panel) , IP20 (Box and Terminal bloks)
Expansion module (on special connector): ETD884-AD Expansion: 2 load cell inp. with integrated power supply for the cell, 8 digital inputs, 2 Encoder inputs 24bit PNP/TTL, 8 digital outputs, 2 analogue outputs V/mA, 4 analogue inp. NTC/PTC/V/mA

Hardware features and communication ports

Processor: ARM V4i 200 MHz
Memory: Flash 256 MB
Serial communication: RS485/RS232 galvanic isolated
Field bus: CAN galvanic isolated
USB: 1 USB for programming on frontal + 1 USB 2.0 on back side (2 on models 5,7" / 7,0")
Ethernet: 1 Ethernet 10/100 Base-T on RJ45 connector
Memory card: SD/MMC Reader

Software features

Operating system: Windows CE 6.0 R3
Programming of operating logics: Logiclab ( Suite), optional choice of languages according to IEC 61131-3
Programming of graphic interface: PageLab ( Suite)
Communication protocols: Modbus RTU Master/Slave; Modbus TCT/IP Master/Slave; CAN Open Master; Free-port mode for modems or proprietary devices
Clock: Real-Time clock, Back-up battery
Download PDF
indietro stampa