• + 39 0775/392052 info@digitron-italia.it
  • versione inglese  versione tedesco  versione spagnolo

Differential pressure transmitter with Modbus communication and Input terminal

DPT-MOD

The DPT-MOD differential pressure transmitter for air conforms to Modbus over serial line protocol using RTU transmission mode and RS485 interface. The digital output signal is sent over Modbus enabling the DPT-MOD to connect directly to a field communications network.
DPT-MOD requires less wiring than the traditional 3-wire transmitters since multiple devices can be connected on serial line.
The DPT-MOD includes an Input terminal that enables reading of multiple other signals such as temperature or control relays over Modbus.
The Input terminal has two input channels designed to accept 0−10 V, ntc10k, Pt1000, Ni1000/(-LG), and BIN IN (potential free contact) signals. For example, DPT-MOD can read values from one differential pressure measurement point and two temperature measurement points. Hence, the DPT-MOD does the work of three transmitters.

Applications

DPT-MOD series devices are commonly used in HVAC/R systems for:
• fan, blower and filter monitoring
• pressure and flow monitoring
• valve and damper control
• pressure monitoring in cleanrooms


Technical specifications

Suitable media:
Air and non-aggressive gases

Communication:
MODBUS RTU, over RS485
8 data bits, parity bit: selectable, 1 stop bit, baud rate: selectable

Response Time:
1…20 s selectable via menu

Measuring element:
Piezoresistive

Max pressure:
400 kPa

Accuracy (from applied pressure):
±1,5 % +1 Pa
(including: general accuracy, temperature drift, linearity,
hysteresis and repetition error)

Electrical interface: 
• Supply voltage: 24 VAC or VDC ± 10 %
• Power consumption: < 1.3 W
• Output signal: via Modbus

Materials:
• Housing:  ABS
• Cover: PC
• Pressure connections: Brass
• Tubing: PVC

Connections:
• Electrical connections: 4+3 spring load terminals, max 1.5 mm2
• Cable entry: M20
• Pressure connections: Male, Ø=5,0 mm and 6,3 mm

Weight:
150 g, with accessories 290 g

Dimensions:
102,0 x 71,5 x 36,0 mm

General ambient condition:
Temperature range:
• Operation: -10…+50 °C
• Storage: -20…+70 °C
Ambient humidity: 0 to 95 % rH

Safety:
Protection standard: IP54

Conformance:
Meets the requirements for CE marking:
• EMC Directive  2004/108/EY
• Rohs Directive  2002/95/EY
• WEEE Directive 2002/96/EC

Download Data Sheet Send Mail for information See Gauge Meters